• Canoes

  • Dollies & Carts

  • Duck Boats

  • Fishing Boats

  • Kayaks

  • Sailboats

  • Trailers

  • Water Cycles

  • Nationwide Shipping

CastleCraft Logo

  • HydroBike
  • Meyers
  • Michicraft
  • Seacycle 
  • Seitech
  • Snark
  • Sportspal
  • Spring Creek
  • Trailex
  • Water Bike
  • Walden

 Racks for Open Box Pickup Trucks

 

FREE SHIPPING ON TRUCK RACKS*
*within the 48 USA

 

Truck Rack on Pickup
TT-2 Truck Rack - Quickly and Easily Mounts to Any Pickup Truck
(Sorry, Pickup Truck, Kayaks and Dog not included)



Aluminum and Stainless Steel - They Never Rust

Truck Rack Layout

600 Lb Capacity on TT-2 Rack set
Top of rack is 65" wide closed,  with a loading bar/side extension on each side of 20", giving a maximum width of 105" possible with both sides fully extended.   Leg Extensions will adjust in  6 increment positions to fit  many possible size requirements.  The top rack bar is 2-3/16" wide and 1-1/2" high.  Height adjusts from 24" to 34"  in 2" increments above bed rails.   Easily adjusts to fit Small Pickup Trucks up to Large Super Cab Pick Ups such as the Ford F350.  34"  maximum height gives you the clearance needed for Double Cab trucks.  Padded Feet are 3"W  X  5" L. 

   

Truck Rack Mounting Leg       

Racks Clamp Securely to the Bed Rails of any Pickup Truck  Adjusts to fit small and full size pickups.  You can quickly remove the clamp mounts on the truck for storage in your garage when not in use.  A molded  cover protects your bed rails.  Height and width are easily adjusted.  All Aluminum & Stainless Steel construction.   Model TT-2

Note:  Bed Liners may require some trimming.
Note:  1999 and newer Chevrolet Pickups require bed rails, also called Rail Caps
 (Rail Caps  are inexpensive and can be found at local Truck accessory dealers.   Either metal or plastic rail caps will work.)

Note:  Trucks with Inside Slide Rails, such as Toyota Tacomas and some Nissans models, can use the TT-2 Truck Rack.  Specify that your truck has the Inside Slide Rail, and Special Clamps Options will be added at no additional cost

 

 

Truck Rack Clamp Detail    

Bedrail Clamps are All Aluminum, and they allow quick and easy detachment with a simple wrench.  For added security, order the optional SEC-TT2  Security Package which replaces one bolt in four of the eight  clamps, with an Allen style screw head.

Truck Rack Security Package

Close-up of Truck Rack Clamp Detail   Optional Security Bolt Package with Tool

 


Truck Rack Load stops
Load Stops

      

Optional Load Stops  LS-4

LS-4 Load Stops come as a Set of 4.  Use them on the TT-2 Truck Rack, The NSC-2 Roof Rack, and the HR-2 Hitch Rack.   tPrevents your boat from shifting from Side to Side.  Quickly attaches to most other cross bars.  Sturdy aluminum frame with Non-Marring Vinyl Block.  Slides to any position on Bar. 

 Individual  Stop  is approximately 3" High x 4" Wide
Fits up to 2-3/4" Wide x 2-1/4"  High Square or Rectangular racks  and Fits up to 2-1/4" round bars.

 

 

KS-1 Kayak Saddles can be added to the TT-2 Truck Rack

Click here for details

           Kayak Saddles

 

 

 

KV-1 Kayak Vertical Set             

KV-1 Kayak Verticals can be added to the TT-2 Truck Rack
Allows you to Carry  Multiple  Kayaks on Edge

Click here for details

 

 

 

 

Truck Rack with  kayaks    Truck rack with canoes

 

Truck Racks can carry multiple Kayaks, two canoes, a boat or a small sailboat

  

Both sides of top racks extends for use as a loading bar or as an extension for wider boats

TT-2       1 Set ( 2 racks) are 570.00 + FREE Shipping & Handling 48 USA

If you need only one rack - order TT-1
TT-1    Consisting of only one rack  285.00 +
FREE Shipping & Handling 48 USA

              Optional Extra Equipment

LS-4 Set Of 4 Load Stops 49.00
KS-1 Kayak Saddle Set for One Kayak 99.00
KV-1 Kayak Verticals Set - Front & Rear 75.00
SEC-TT2  Security Package # 21.00
K-ST Set of Two 7' Straps for Kayak 10.00
C-ST Set of Two 15' Straps for Canoe 16.00
R-CLP Substitute Rail Clamp in place of Standard for certain Toyota and Nissan Rail Systems No
Charge*

*No Charge for R-CLP when ordered with TT-1 or TT-2 Truck Rack(s)

# SEC-TT2 consists of 4 tamperproof bolts with a special tool.  Replace one bolt on each clamp to  make them difficult to remove.

 

TT-2 Truck Rack Advantages Vs Other Racks
Other racks make you buy expensive accessories to carry canoes & kayaks

    TT-2 RACK SYSTEM

 OTHER RACKS

   
    Designed Specifically for Boats  Boat use is secondary
    Top bar is padded  No padding - needs boat options
    Loading bars are standard  no loading bars standard
    Height and width adjusts  many do not adjust
    Can fit virtually any pickup  may need options for other pickups
    Rugged Construction  some actually have plastic supports
    Fits Large Super Cabs and Double Cabs  most do not adjust high enough to clear 


 

Return to Accessories

 

American Express Visa Mastercard Discover

Return to Main Menu

Specials

 

Better Business Bureau Logo Link

 


HOME
  ACCESSORIES     BOATS    CANOES     CONTACT    DOLLIES & CARTS    DUCKBOATS    FISHING BOATS    GALLERIES    INFORMATION    KAYAKS      ORDER    PARTS    RACKS    SAILBOATS    SEACYCLE- WATER- BIKE    SPECIALS     TRAILERS   

All prices, specifications and availabilities subject to change without notice

copyright Castle Equipment Co.  1997-2010