|
Hitch Racks for Cars
&
Pickup Trucks
Aluminum
and Stainless Steel - They Never Rust
 |
|
 |
|
Hitch Rack on Truck |
|
Hitch Rack on Car |
All aluminum hitch rack will allow you to carry up to
two canoes or five kayaks by using it as the rear carrier. Use an
existing front rack, or add our universal suction cup rack or truck rack for the
forward carrier. The longer span can increase stability. It
fits into any existing 3/4" hole for accommodating a ball hitch.
Offset option is available to allow you to still use your hitch to tow a
trailer at the same time. By installing a front hitch to a pickup,
you can install the hitch rack as the forward carrier in instances where you
need to carry a boat farther forward, such as with a 5th wheel on a pickup bed.
 |
|
Hitch Rack can fit in either a standard bumper hitch or a receiver
type hitch. Hitch rack telescopes up to fit the largest pickup
height or lower for cars. |
The top horizontal bar is padded for 36". Telescoping built in
extensions extend the width of the top bar to 57" wide. Rack extends
up to 66" high, will fit all large size pickups, including Ford 350.
 |
|
Hitch Rack on front with TT-1 on rear
By installing a factory front bumper hitch, the Hitch Rack can be
installed on the front of a vehicle.
-
For Very long boats
-
For Fifth Wheels
-
For Towing trailers
|
Offset option lets you tow a trailer and use Hitch Rack
 |
|
Hitch Rack Base bolts to ball shank hole in bumper or
receiver bars 3/4" hole. Order our option HB-1 for a
2" receiver or obtain a blank draw bar locally for quick mount in a
receiver . |
|
Load Stops
|
|
Optional Load Stops LS-4
LS-4 Load Stops come as a Set of 4. Use them on the TT-2
Truck Rack, The NSC-2 Roof Rack, and the HR-2 Hitch Rack. Prevents your boat from shifting from Side to Side. Quickly
attaches to most other cross bars. Sturdy aluminum frame with
Non-Marring Vinyl Block. Slides to any position on Bar.
Individual Stop is approximately 3" High x
4" Wide
Fits up to 2-3/4" Wide x 2-1/4" High Square or
Rectangular racks and Fits up to 2-1/4" round bars. |
 |
|
KV-1 Kayak Verticals can be added to the TT-2 Truck Rack
Allows you to Carry Multiple Kayaks on Edge
Click here for details
|
HR-2
1 Hitch Rack is 189.00 + 19.95
Shipping
& Handling 48 USA
|
Optional Extra Equipment |
| LS-4 |
Set Of 4 Load Stops |
49.00 |
| KS-1 |
Kayak
Saddle Set for One Kayak |
99.00 |
| KV-1 |
Kayak
Verticals Set - Front & Rear |
75.00 |
| K-ST |
Set of Two 7' Straps for Kayak |
10.00 |
| C-ST |
Set of Two 15' Straps for
Canoe |
16.00 |
| OFF-1 |
Offset (to use hitch rack and
trailer ball together on same drawbar) |
8.00 |
| HB-1 |
2" x 2"
Draw bar 8" long blank |
22.00 |
Hitch Rack includes set of stabilizing straps
Use your existing front rack or you can order a single Truck
Rack or a single Suction Cup Rack.
| 
